Signal

Hermes connects to Signal through the signal-cli ↗ daemon running in HTTP mode. The adapter streams messages in real-time via SSE (Server-Sent Events) and sends responses via JSON-RPC.

Signal is the most privacy-focused mainstream messenger — end-to-end encrypted by default, open-source protocol, minimal metadata collection. This makes it ideal for security-sensitive agent workflows.

---

• signal-cli — Java-based Signal client (GitHub ↗)
• Java 17+ runtime — required by signal-cli
• A phone number with Signal installed (for linking as a secondary device)

Installing signal-cli

# macOS
brew install signal-cli

# Linux (download latest release)
VERSION=$(curl -Ls -o /dev/null -w %{url_effective} \
  https://github.com/AsamK/signal-cli/releases/latest | sed 's/^.*\/v//')
curl -L -O "https://github.com/AsamK/signal-cli/releases/download/v${VERSION}/signal-cli-${VERSION}.tar.gz"
sudo tar xf "signal-cli-${VERSION}.tar.gz" -C /opt
sudo ln -sf "/opt/signal-cli-${VERSION}/bin/signal-cli" /usr/local/bin/

---

Signal-cli works as a linked device — like WhatsApp Web, but for Signal. Your phone stays the primary device.

# Generate a linking URI (displays a QR code or link)
signal-cli link -n "HermesAgent"

1. Open Signal on your phone
2. Go to Settings → Linked Devices
3. Tap Link New Device
4. Scan the QR code or enter the URI

---

# Replace +1234567890 with your Signal phone number (E.164 format)
signal-cli --account +1234567890 daemon --http 127.0.0.1:8080

Verify it's running:

curl http://127.0.0.1:8080/api/v1/check
# Should return: {"versions":{"signal-cli":...}}

---

The easiest way:

hermes gateway setup

Select Signal from the platform menu. The wizard will:

1. Check if signal-cli is installed
2. Prompt for the HTTP URL (default: http://127.0.0.1:8080)
3. Test connectivity to the daemon
4. Ask for your account phone number
5. Configure allowed users and access policies

Manual Configuration

Add to ~/.hermes/.env:

# Required
SIGNAL_HTTP_URL=http://127.0.0.1:8080
SIGNAL_ACCOUNT=+1234567890

# Security (recommended)
SIGNAL_ALLOWED_USERS=+1234567890,+0987654321    # Comma-separated E.164 numbers or UUIDs

# Optional
SIGNAL_GROUP_ALLOWED_USERS=groupId1,groupId2     # Enable groups (omit to disable, * for all)
SIGNAL_HOME_CHANNEL=+1234567890                  # Default delivery target for cron jobs

Then start the gateway:

hermes gateway              # Foreground
hermes gateway install      # Install as a user service
sudo hermes gateway install --system   # Linux only: boot-time system service

---

DM Access

DM access follows the same pattern as all other Hermes platforms:

1. SIGNAL_ALLOWED_USERS set → only those users can message
2. No allowlist set → unknown users get a DM pairing code (approve via hermes pairing approve signal CODE)
3. SIGNAL_ALLOW_ALL_USERS=true → anyone can message (use with caution)

Group Access

Group access is controlled by the SIGNAL_GROUP_ALLOWED_USERS env var:

---

Attachments

The adapter supports sending and receiving media in both directions.

Incoming (user → agent):

• Images — PNG, JPEG, GIF, WebP (auto-detected via magic bytes)
• Audio — MP3, OGG, WAV, M4A (voice messages transcribed if Whisper is configured)
• Documents — PDF, ZIP, and other file types

Outgoing (agent → user):

The agent can send media files via MEDIA: tags in responses. The following delivery methods are supported:

• Images — send_multiple_images and send_image_file send PNG, JPEG, GIF, WebP as native Signal attachments
• Voice — send_voice sends audio files (OGG, MP3, WAV, M4A, AAC) as attachments
• Video — send_video sends MP4 video files
• Documents — send_document sends any file type (PDF, ZIP, etc.)

All outgoing media goes through Signal's standard attachment API. Unlike some platforms, Signal does not distinguish between voice messages and file attachments at the protocol level.

Attachment size limit: 100 MB (both directions).

Native Formatting, Reply Quotes, and Reactions

Signal messages render with native formatting instead of literal markdown characters. The adapter converts markdown (**bold**, *italic*, ` code , ~~strike~~, ||spoiler||, headings) into Signal bodyRanges so the text shows up with real styling on the recipient's client rather than as visible ** / `` characters.

Reply quotes. When Hermes replies to a specific message, it now posts a native reply that quotes the original — same UI affordance Signal users see when they use "Reply" themselves. This is automatic for replies generated in response to an inbound message.

Reactions. The agent can react to messages via the standard reaction API; reactions surface in Signal as emoji reactions on the referenced message rather than as extra text.

None of this requires additional config — it ships on by default in recent signal-cli builds. If your signal-cli version is too old, Hermes falls back to plaintext delivery and logs a one-time warning.

Typing Indicators

The bot sends typing indicators while processing messages, refreshing every 8 seconds.

Tool Progress Display

Signal does not support editing already-sent messages. Hermes therefore suppresses gateway tool-progress bubbles on Signal, even when /verbose is enabled and saves a non-off mode for the platform.

You can still see tool activity in the CLI, and final Signal replies can include normal assistant output. If you need live per-tool progress in chat, use a messaging platform with message editing support.

Phone Number Redaction

All phone numbers are automatically redacted in logs:

• +15551234567 → +155****4567
• This applies to both Hermes gateway logs and the global redaction system

Note to Self (Single-Number Setup)

If you run signal-cli as a linked secondary device on your own phone number (rather than a separate bot number), you can interact with Hermes through Signal's "Note to Self" feature.

Just send a message to yourself from your phone — signal-cli picks it up and Hermes responds in the same conversation.

How it works:

• "Note to Self" messages arrive as syncMessage.sentMessage envelopes
• The adapter detects when these are addressed to the bot's own account and processes them as regular inbound messages
• Echo-back protection (sent-timestamp tracking) prevents infinite loops — the bot's own replies are filtered out automatically

No extra configuration needed. This works automatically as long as SIGNAL_ACCOUNT matches your phone number.

Health Monitoring

The adapter monitors the SSE connection and automatically reconnects if:

• The connection drops (with exponential backoff: 2s → 60s)
• No activity is detected for 120 seconds (pings signal-cli to verify)

---

---

• Phone numbers are redacted in all log output
• Use DM pairing or explicit allowlists for safe onboarding of new users
• Keep groups disabled unless you specifically need group support, or allowlist only the groups you trust
• Signal's end-to-end encryption protects message content in transit
• The signal-cli session data in ~/.local/share/signal-cli/ contains account credentials — protect it like a password

---